RA-BS6500-32H

The Ragile RA-BS6500-32H is a new generation high performance and high density 50G switch comply with Open19^TM   specification,  which  provide  3.2Tbps  in-band  and  51Gbps  out-of-band  switching  capacity  to driven a large-scale wire-speed non-blocking network.

RA-BS6500-32H provides high density 48-port 50G in-band interface and 48-port 1G out-of-band interface and 8-port 100G Quad Small Form-Factor Pluggable (QSFP28) up-link interface supporting 25/100Gbps high performance flexible-scale datacenter networks. All 50G and 1G interface can be connected to Open19^TM  servers with Molex Impel break-out cable. The platform provide hot-pluggable 4+1 redundancy cooling fan module to meet the high reliability requirement of datacenter networks.

RA-BS6500-32H is Broadcom ICOS certified and equipped with a x86 CPU and BMC. The switch can also be used as a bare metal switch, customer can install any NOS needed.

Performance

• 8×QSFP28 100G up-link Ports

• 48×50G Ports

• 48×1G Out-of-band Ports

• Base on Broadcom BCM56960 (Tomahawk)

• Up to 3.2 Terabits per second

• Up to 3.3 Billion packets per second

• Wire speed L2/L3 forwarding

Cloud Networking Ready

• 16 MB Integrated Smart Buffer

• 136 K MAC entries

• Up to 128 K IPv4 Routes

• Up to 84 K IPv6 Routes

• Up to 136 K Multicast Groups

• Up to 128-way ECMP

* The above table is the maximum capacity that the switching chip can provide.

Data Center Optimized Design

• Typical power of under 4W per 100G port

• 4+1 redundant & hot-swappable fans

• Rear-to-front cooling

• Toolless maintenance and simple installation

Resilient Control Plane

• Intel Xeon D-1527 (4 core @ 2.2GHz, 6MB LLC, 35W)

• Support up to 48G DDR4 2133/1600 ECC

• 128 GB SSD

Advanced Provisioning & Monitoring

• Self-configure and recover from USB