Ragile RA-B6990-16MDC-CP is a proof-of-concepts switch of near packaged optics and cold plate cooling technology for cloud-scale datacenter. The switch based on advanced 112Gbps SERDES 25.6Tbps switch ASIC.
Ragile RA-B6990-16MDC-CP* is a proof-of-concepts switch of near packaged optics and cold plate cooling technology for cloud-scale datacenter. The switch based on advanced 112Gbps SERDES 25.6Tbps switch ASIC.
RA-B6990-16MDC-CP introduces ultra-high density 64-port 400GbE DR4 optics in 1RU chassis by using SN-MT optic interface. The switch also provide 8 QSFP-DD form external laser source (ELS) / remote laser source (RLS) interface at front panel for near packaged optics module laser input.
The switch quipped a cold plate cooling system to keep the high heat flux density switch ASIC and near packaged optic modules in low working temperature, providing high system reliability. By using a non-conductive coolant, the switch can keep safe and no short-circuit risk even leakage happens. A built-in coolant micro-leak detection system will help to improve rack level reliability.
The platform provide hot-pluggable 1+1 redundancy power module and 3+1 redundancy cooling fan module to meet the high reliability requirement of datacenter and carrier networks.
NOTE:
*This is only a prototype switch. Please consult our technical service for further information.
First-class Performance
Resilient Configuration
Data Center Oriented Design
• Typical power of under 4W per 100GbE port and 1.5W per 25GbE port
• Over 94% efficient power supplies
• Tool less maintenance and simple installation
Cloud Networking Ready
• Shared 32MB Buffer with burst absorption
• Up to 288K MAC and 168K Host entries
• Over 344K IPv4 Routes
• Over 96K IPv6 Routes
* The above table is the maximum capacity that the switching chip can provide.
Outstanding OS Compatibility
• Loaded with Open Network Install Environment (ONIE) software installer and OpenBMC
• Compatible with software for SONiC
Fully-loaded Software Functions
• BGP
• Route Policies
• ARP to host routing
• Load Balance based on LAG/ECMP
• Interface ACL
• Global ACL
* Download datasheet to see all software functions.
Switch Model |
RA- B6990-16MDC-CP |
Ports |
64 × SN-MT 400G DR4 + 8 × QSFP-DD ELS/RLS |
Max 100/40GbE Ports |
64/128 |
Max 25/10GbE Ports |
256 |
Throughput (full duplex) |
51.2 Tbps |
Packets/Second |
10.6 Bpps |
CPU |
Intel Xeon D-1533N |
System Memory |
8GB (Up to 32GB) |
System Storage |
≥64GB |
BMC Option |
Yes |
Switch ASIC |
Broadcom BCM56996 (Tomahawk 4G) |
Packet Buffer Memory |
113.66MB (Dynamic Buffer Allocation) |
10/100/1000 MGMT Ports |
1 |
RS-232 Serial Ports |
1 (RJ-45) |
USB Ports |
1 (Type-A) |
Hot-swap Power Supplies |
2 (1+1 redundant) |
Hot-swappable Fans |
4 (3+1 redundant) |
Airflow |
Front to rear |
Typical/Max Power Draw |
1838.9 W |
Typical/Max Heat Dissipation |
6274.58 BTU/hr |
Size(W×H×D) |
17.24 × 1.72 × 26.77 in. (438 × 43.6 × 680 mm) |
Weight |
46.5 pounds (21.1kg) |
Power Supplies |
2000W |
Not applicable
Terms of Use Privacy Policy Cookie Policy ©2022 Ragile networks inc. All rights reserved
Ragile Cookie Policy
Cookies on this website are used by Ragile for giving the best user experience. By continuing to browse this website, you consent to our Terms of Use, Privacy Policy, and Cookie Policy. To revoke your consent, please configure the cookie settings in your browser settings.