The Ragile RA-B6910-64C switch is a new generation high density 100GbE switch designed for cloud-scale data center and campus networks, which provide a powerful cache capacity and advanced scheduling mechanism driven large scale line-rate non-blocking network.
The Ragile RA-B6910-64C switch is a new generation high density 100GbE switch designed for cloud-scale data center and campus networks, which provide a powerful cache capacity and advanced scheduling mechanism driven large scale line-rate non-blocking network.
RA-B6910-64C provides 64-port backward-compatible 100GbE QSFP28 interface to transparently migrate existing data center fabrics from 40Gbps speeds to 100Gbps. The platform provide hot-pluggable 1+1 redundancy power module and 2+1 redundancy cooling fan module to meet the high reliability requirement of datacenter and carrier networks.
NOTE：
The Ragile RA-B6910-64C is a white box switch hardware system with basic SONiC OS. Software and other services need to be purchased seperately.
First-class Performance
• 64 × QSFP28 100GbE Ports
• Up to 12.8 Tbps (full duplex)
• Up to 4400 Mpps
Resilient Configuration
• Broadcom BCM56970 (Tomahawk 2)
• Intel Xeon D-1527 Processor (Formerly Broadwell DE)
• 8GB DRAM
• System storage≥240GB
Data Center Oriented Design
• Typical power of under 4.5W per 100GbE port
• 1+1 redundant & hot-swappable power
• 2+1 redundant & hot-swappable fans
• Tool less maintenance and simple installation
Cloud Networking Ready
• Shared 42MB Buffer with burst absorption
• Up to 264K MAC and 128K Host entries
• Over 384K IPv4 Routes
• Over 128K IPv6 Routes
* The above table is the maximum capacity that the switching chip can provide.
Outstanding OS Compatibility
• Loaded with Open Network Install Environment (ONIE) software installer and OpenBMC
• Compatible with software for SONiC
Fully-loaded Software Functions
• BGP
• Route Policies
• ARP to host routing
• Load Balance based on LAG/ECMP
• Interface ACL
• Global ACL
• etc.
* Download datasheet to see all software functions.
1、Specifications
|
Switch Model |
RA-B6910-64C |
|
Ports |
64×QSFP28 |
|
Max100/40GbE Ports |
64 |
|
Throughput (full duplex) |
12.8Tbps |
|
Packets/Second |
4400Mpps |
|
Latency (cut-through mode) |
1137ns |
|
CPU |
Intel Xeon D-1527 |
|
System Memory |
8GB (Up to 32GB) |
|
System Storage |
≥240GB |
|
BMC Option |
Yes |
|
Switch ASIC |
Broadcom BCM56970(Tomahawk 2) |
|
Packet Buffer Memory |
42MB (Dynamic Buffer Allocation) |
|
10/100/1000 MGMT Ports |
1 |
|
RS-232 Serial Ports |
1 (RJ-45) |
|
USB Ports |
1 |
|
Hot-swap Power Supplies |
2 (1+1 redundant) |
|
Hot-swappable Fans |
3 (2+1 redundant) |
|
Airflow Option |
Forward airflow |
|
Typical/Max Power Draw |
610W/785W |
|
Typical/Max Heat Dissipation |
2081.41/2678.53 BTU/hr |
|
Size(W×H×D) |
17.32×3.39×22.83 in. |
|
Weight |
38.5 pounds (17.5kg) |
|
Power Supplies |
800W (Forward airflow) |
2、Standard Compliance
|
EMC |
Emissions: FCC part15 Subpart B,EN55032, EN61000-3-2, EN61000-3-3 or EN61000-3-11, EN61000-3-12(as applicable) |
|
Safety |
UL/CSA 62368-1, EN 62368-1,IEC 62368-1 CB Scheme with all country differences |
|
Certifications |
North America (NRTL) |
|
European Union Directives |
2006/95/EC Low Voltage Directive |
3、Power Supply Specifications
|
Power Supply |
800W |
|
Input Voltage |
100-240V AC |
|
Typical Input Current |
10-5A (AC) |
|
Input Frequency (AC) |
50~60Hz |
|
Input Connector |
IEC 320-C13 |
|
Efficiency (Typical) |
94% Platinum |
4、Environmental Characteristics
|
Operating Temperature |
32 to 113° F (0 to 45°C) |
|
Storage Temperature |
-40 to 158° F (-40 to 70°C) |
|
Relative Humidity |
5 to 95% non-condensing |
|
Altitude (Operating) |
Designed to meet: 0 to 5,906ft |
|
Altitude (Non-operating) |
-1640ft to 16,404ft |
| Model | Description |
|---|---|
| RA-B6910-64C |
64 fixed 100G QSFP28 ports. 2 slots for power supply modules. 3 slots for fan modules. 2 power supply modules and 3 fan modules already included. |
| P2EFAN III-F |
Fan module for, front-to-rear airflow. With up to 3 fan modules, support 2+1 redundancy. |
| PA800I-F |
AC power supply module, front-to-rear airflow. With up to 2 power modules, support 1+1 redundancy. |
Follow us
Phone
+1(669)666-7653
info@ragilenetworks.com
Terms of Use Privacy Policy Cookie Policy ©2022 Ragile networks inc. All rights reserved
Ragile Cookie Policy
Cookies on this website are used by Ragile for giving the best user experience. By continuing to browse this website, you consent to our Terms of Use, Privacy Policy, and Cookie Policy. To revoke your consent, please configure the cookie settings in your browser settings.
